Updates from December, 2019 Toggle Comment Threads | Keyboard Shortcuts

  • duncanbowring 12:25 on December 18, 2019 Permalink | Reply
    Tags: , atari st, fpga, mist,   

    MiST 1.3 Atari ST and Amiga 

    What is it?

    The MIST board was designed to implement classic 16 bit computers like the Amiga, Atari ST(E) or the Apple Macintosh (and even early 32 bit computers like the Acorn Archimedes) as a System-on-a-Chip using modern hardware. But it equally well supports 8 bit systems like the Atari 800/XL, ZX81, ZX Spectrum, C64, Atari VCS, Atari 5200, Colecovision, Apple II, Sega Master System, Nintendo Gameboy, Nintendo NES, Odyssey2 plus others and 16 bit consoles SNES, Genesis/Megadrive, PC Engine. It also supports over 100 Arcade games!

    See the main site here – https://github.com/mist-devel/mist-board/wiki/WhatIsThis

    Hardware

    Adding a DC Power Jack

    My micro-usb power input broke off. It looks like this is fairly common, but you are not dead in the water if you can do a little soldering.

    You need to move an SMD resistor, and add a DC power jack.

    The how to: https://github.com/mist-devel/mist-board/wiki/PwrDcJack 

    63067F0E-278D-488C-886C-BE2D3B24272B

    Adding Networking (Amiga)

    adding networking hardware for Amiga. Note, this won’t work with 1.4 of the device, as they removed the UART/SERIAL holes.

    Atari ST

    Setting up the SD Card

    adding the core, and files, and rom images

    Setting up and using Hardfiles on the SD Card

    creating and adding hardfiles, then setting them up in the ST for software

    Useful Downloads

    • HDDSETUP.st – Atari ST Floppy Image that contains the AHDI 6061 HDD setup files, to enable you to format/use an SD card as a HDD, or hardfiles as HDDs with the MiST. I cannot seem to find this anywhere else. Hard drive setup floppy disk image.
    • Empty Hardfiles here

     

    Commodore Amiga

    Setting up the SD card

    adding the core, files, and rom images

    Setting up and using Hardfiles on the SD Card

    creating and adding hardfiles, then setting them up in the Amiga for software

     
  • duncanbowring 09:19 on September 8, 2015 Permalink | Reply
    Tags: a1200, ACA, ACA1221,   

    Kickstart 3.1 ROMs, Indivision AGAMK2cr, ACA1221, CF to IDE, Gotek HxC, USB mouse: installation Amiga 1200 

      Installation info coming soon

       

      

       
      

       
        
        
        
       

     
  • duncanbowring 23:15 on February 20, 2013 Permalink | Reply
    Tags: , amiga cd32 fmv module schematic, cd32, cdgs mpeg module, schematics   

    Commodore Amiga CD32 FMV CDGS MPEG Module Schematics 

    In an attempt to preserve some of the aging Amiga community (I had no idea it was starting to get difficult to obtain some hardware 😦 ), I’m going to start storing and presenting some of the things I find along the way, as another mirror.

    Commodore Schematic – CDGS MPEG MODULE  (C) 1993 COMMODORE ELECTRONICS LTD.

    https://www.mediafire.com/?onafaqra4ropsec

    Please contact me if you are a current copyright holder and need me to remove something.

     
c
Compose new post
j
Next post/Next comment
k
Previous post/Previous comment
r
Reply
e
Edit
o
Show/Hide comments
t
Go to top
l
Go to login
h
Show/Hide help
shift + esc
Cancel
%d bloggers like this: